User's Manual

Guide to the SRX800 Receiver Preliminary
AD J U S T I N G FR E Q U E N C Y AN D GA I N
A new frequency can be selected using the Up or Down Arrows. The amount of
increment or decrement is specified by Set Delta for frequency (see section called
Set Delta in chapter 1 for details).
A new gain can be selected using the Up or Down Arrows. The
amount of increment or decrement is specified by Set Delta for gain (see section
called Set Delta in chapter 1 for details).
EN AB L I N G /DI S AB L I N G NO I S E BL A N K I N G (N BL A N K )
Noise blanking enhances the receiver’s audio performance, especially in aircraft
or other noisy environments, by suppressing the receiver’s audio response except
when a signal is detected.
This helps prevent auditory fatigue when using the receiver for extended periods
of time.
Press the key labelled NBlank to enable and disable noise blanking.
EN T E R I N G A S P E C I F I C GAI N V AL U E
During a scan via Signal, the gain can be increased and decreased using the
appropriate keys (see section on Adjusting Frequency and Gain above), but there
are occasions when it is desired to change the gain to a specific value for the
particular antenna being scanned.
Enter this specific gain value via:
Manual > 3)Signal > 2)Gain
Immediately after the value has been entered, the receiver returns to the Signal
page.