User's Manual

Guide to the SRX800 Receiver Preliminary
A new gain can be selected with the Up or Down arrows. The
amount of increment or decrement is specified by Set Delta for gain (see the
section Set Delta in Chapter 1 for details).
EN AB L I N G /DI S AB L I N G NO I S E BL AN K I N G (N BL AN K )
Noise blanking enhances the receiver’s audio performance, especially in aircraft
or other noisy environments, by suppressing the receiver’s audio response except
when a signal is detected.
This helps prevent auditory fatigue when using the receiver for extended periods
of time.
Press the NBlank key to enable or disable noise blanking.
EN T E R I N G A S P E C I F I C GAI N V AL U E
During a search, the gain can be increased and decreased using the appropriate
keys (see section on Adjusting Frequency and Gain above), but there are
occasions when it is desirable to change the gain to a specific value for the
particular antenna being scanned.
Enter this specific gain value via: Manual > 2)Search > 2)Gain
Immediately after the value has been entered, the receiver returns to the Search
page.
ENTERING A MINIMUM FREQ U E N C Y
Enter the frequency at which the scan should start via:
Manual > 2)Search > 1)Start > 3)Min Freq
ENTERING A MAXIMUM FR E Q U E N C Y
Enter the frequency at which the scan should end via:
Manual > 2)Search > 1)Start > 4)Max Freq