User's Manual

M ANUAL M O D E
CH AP T E R OV E R V I E W
Manual mode provides the ability to collect data without using a Configuration
(see the Codelog Mode chapter for details on Configurations). In manual mode
operation, data is not recorded by the receiver. Detections are indicated by pings
or clicks emitted by the speaker on the receiver’s front panel. Adjust the volume
by turning the OFF/VOL knob clockwise.
Use a quality isolating (monaural) headphone set when listening to weak
signals or when working in environments with a lot of ambient noise.
Some of the receiver’s settings can be changed while in manual mode.
After selecting the Manual key on the keypad, three menu items become
available:
1) Code Set, 2)Search (and) 3)Signal
The first menu item provides the ability to change the active code set. After
selecting 1)Code Set, use the keypad to select the desired code set.
The other two menu items, Search and Signal, provide two different methods of
starting a scan in manual mode and changing various settings that affect the
scan.
Some settings, listed below, are the same in either Search or Signal:
• Starting a scan
• Setting the type of transmitter to scan (Beep/ID/Sensor)