User's Manual

2)TI M E
EN T E R I N G T H E GMT CO R R E C T I O N
For the GPS feature of the receiver to update its clock properly, it must know the
GMT correction for the receiver’s location.
Enter the GMT correction via:
Setup > 2)Time > 1)GMT Correction
The time format is in hh/mm.
EN T E R I N G LO C AL DA T E AN D TI M E
The receiver uses the local time and date in combination with the GMT
correction so that data can be displayed in local time, even though the receiver
works internally in GMT time.
Enter the date via:
Setup > 2)Time > 2)Local Date
The date format is in dd/mm/yy.
Enter the time via:
Setup > 2)Time > 3)Local Time
The time format is in hh/mm/ss and is based on a 24-hour clock (a.k.a. military
time).