User's Manual

Guide to the SRX800 Receiver Preliminary
ST A R T I N G A GPS AC Q U I S I T I O N
Start acquiring a GPS 2D position by pressing the GPS key on the keypad (key
number 4). While attempting to acquire a position, the display shows the number
of satellites as they are found.
If a valid position is acquired, the following information is provided on the
display: Latitude, Longitude, current date, current GMT time, the number of
satellites used, HDOP, and PDOP. The display flips back and forth between
showing the Latitude and Longitude for four seconds and the satellites, HDOP
and PDOP information for two seconds. Either the time or date is also shown on
the display and it is updated every five seconds.
GPS cannot be used if the receiver is logged off. However, it is possible to log
off from the receiver while the receiver is attempting to acquire a GPS position.
When logging back on, the display shows the results of the GPS position.
ST O P P I N G A GPS AC Q U I S I T I O N
Press the END/ESC key to stop acquiring a GPS position.
S E T U P M O D E
3
CH AP T E R OV E R V I E W
Setup Mode allows global settings to be changed and applied. Global settings are
those settings that affect how the receiver operates. Setup Mode allows you to: