User's Manual

SE T DE L T A
Set Delta is used to set the increments for frequency and gain, so that when the
Up and Down Arrows for frequency and gain adjustment are used, the receiver
knows the amount it should advance up or down.
SET DE L T A F O R FR E Q U E N C Y
When adjusting the frequency manually, the receiver increases or decreases the
frequency (kHz) in use by an amount equal to the Frequency Delta increment.
Set this increment via: Set Delta > 1)Freq
SET DE L T A F O R GAI N
When incrementing gain manually, the receiver increases the gain in use by an
amount equal to the Set Delta gain increment.
Set this increment via: Set Delta > 2)Gain
GPS
The GPS key provides the ability to acquire a GPS fix. This data is not stored by
the receiver (except when accessed in Codelog mode). This feature should be
tested before the enabling the GPS feature (see chapter Codelog Mode, section
Enabling/Disabling GPS Positioning) by starting a scan via Codelog Mode.
Testing the feature verifies that the receiver is able to take a valid 2D position.
When testing, ensure that the GPS antenna supplied with the receiver is
connected to the receiver and that the antenna has a clear view of the sky.
CRTO cannot be used with the GPS 2D-positioning feature of the receiver;
however it still allows the GPS clock to function.