User's Manual

9
Key Pad Size 16 keys
Frequency Display 6 digits
Frequency Control Direct selection of any frequency in the tunable
bandwidth with a resolution of 1 kHz
Frequency Steps (∆F) Adjustable 1 to 999 kHz
Number of Frequency Table Partitions 16
Maximum Frequency Table Size 512
Signal Strength Display 3 digits or bar graph
Signal Strength Range 40 to 230 relative signal strength units
(approximately 40 dB)
RF Gain Display 2 digits
RF Gain Control Direct selection of gain between 0 and 99 units
(approximately 60 dB) at a resolution of 1 unit
Gain Steps (∆G) 1 to 99 units
Scan Rate Display 5 digits
Scan Rate Control 1 s to 9 m 59.99 s at 0.01 s resolution
Scan Time Steps (∆T) 1 to 99 seconds
Pulse Rate/Interval Units Beats per Minute (BPM) or Milliseconds (ms)
Time Interval Window 0 - 34463 ms
CONTROLS AND CONNECTIONS
ANT Connector
This standard BNC jack is the antenna connector. Using a 50 Ω coaxial cable such as Belden 9311,
this jack can be connected to any matched antenna. The choice of antenna, i.e. yagi, vertical,
corner reflector, etc., depends on the study environment and objectives.