User Guide

ManualsBrandsLOSRECAL ManualsOffice ElectronicsThermal Receipt Printer, Restaurant Kitchen Printer of Sound Reminder/Wall-Mount/Auto Cutter, 3 inches 80mm Desktop POS Bill Machine with USB/LAN/Cash Drawer Port, Support Windows

Table Of Contents

CONTENTS

Driver Installation................................................................................................................................ 1

Connection Set up.................................................................................................................................2

1. LAN printer set up.......................................................................................................................2

2. DHCP enable/disable.................................................................................................................. 3

3. Virtual COM set up..................................................................................................................... 4

Common Settings..................................................................................................................................6

1. Cash Drawer Setup......................................................................................................................6

2. Alarm Setting.............................................................................................................................. 6

3. Print Density................................................................................................................................8

4. Add Logo on Receipts.................................................................................................................9

5. Cutter Setting.............................................................................................................................11

6. Code page and currency symbol set.......................................................................................... 12

7. Chinese printing........................................................................................................................ 14

8. Factory Reset.............................................................................................................................14

Summary of content (15 pages)

PAGE 1
CONTENTS Driver Installation................................................................................................................................ 1 Connection Set up.................................................................................................................................2 1. LAN printer set up.......................................................................................................................2 2. DHCP enable/disable.........................................
PAGE 2
Driver Installation NOTE: Our models do not support MacOS. How to install the Windows driver? 1) Open the driver setup program ‘POS printer driver VX.XX.exe’ in the driver CD folder. 2) Select the “POS-80C” series as picture below and “Check the USB port”, then continue the setup. 3) If the installation fails, please check if the the driver installer was blocked by the Firewall or your system was enabled the driver signature enforcement.
PAGE 3
Connection Set up 1. LAN printer set up To setup LAN printer, you need to change the printer IP to match your network. You can use our setting tool ‘PrinterTEST’ that comes with driver CD folder to set the IP address for the printer. 1) You need to connect the printer with Windows computer(We currently only have Windows version for the setting tool) by USB cable. 2) Then, open the “PrinterTEST” to start IP setting, following the instruction below or video at: https://youtu.
PAGE 4
2. DHCP enable/disable 1) Connect the printer with PC by USB cable; 2) Open the setting tool ‘PrinterTEST’ on driver CD. 3) Then you can enter the HEX command about DHCP( ‘1F 1B 1F 91 00 49 FA 01 5A’ to enable, ‘1F 1B 1F 91 00 49 FA 00 5A’ to disable) to function it. 4) After sending the command to enable DHCP, you can connect the LAN port and print a selftest page to check the assigned IP address. This is the tutorial video: https://youtu.
PAGE 5
3. Virtual COM set up 1）Please connect the printer with PC by USB. Then Set Virtual USB in setting tool. 2) After setting, you can print a seft-test page, it will shows USB Serial, mean setting successfully 3) For win 7/8 needs to install Virtual Driver, 64bit or 32bit (Notes: for win10 OS, no need install Virtual Driver) Driver Download: https://my.pcloud.
PAGE 6
-5-
PAGE 7
Common Settings 1. Cash Drawer Setup You can setup the cash drawer from “Printer properties” >> Device settings, then set as below. * The ESC/POS command for our printer to open the cash drawer is ‘1B 70 00 40 40’, some POS software may need this command to set up drawer opening in settings. 2. Alarm set 1) If your model is ITPP082, you can set the alarm when the paper finish printing by driver, in the Printer properties ---> device settings ---> printing alarm.
PAGE 8
2) If your model is ITPP085, you can just directly set the alarm when the paper finish printing from Advanced setting in the setting tool ‘printertestV5.
PAGE 9
3. Print Density You can set the density to larger value by the setting tool (printerTEST) that comes with the driver CD. There are 2 different ways to set it with the tool: 1) Model ITPP085: Go to ‘Advance’---> ‘print density’--->select a larger value and click the setting.
PAGE 10
*If increasing the density still not help to make the printing clearer, please change a new thermal paper and clean the printer head with cleaning pen or cloth with alcohol . 4. Add Logo You can download the logo to the printer by the setting tool ‘PrinterTEST’. You can get the ‘NV download’ in ‘advance’ option and select the image you need to add as logo. After that, you can go to the ‘device setting’ in “printer properties” to select the logo ID.
PAGE 11
- 10 -
PAGE 12
5. Cutter Setting If your printer can’t cut the paper after printing, please do the troubleshooting below: 1) Please try to print a self-test page to check if the paper can be cut. How to print a self-test: Turn off the printer.  Press the FEED button and hold on.  Turn on the printer at the same time. Release the FEED button after 2 seconds. 2) If the self-test paper can be cut normally, which means the cutter is ok, please check if you enable the cutter function in your POS software.
PAGE 13
6. Code page and currency symbol set Some POS software will need the printer to change the code page to be able to print some language symbols. You can connect the printer with PC by USB, then use the setting tool ‘printertest’ to set the code page you need. 1) Model ITPP082 You can check the supported code page of the printer by clicking option ‘’PrintCodePage in Advance setting, then you can enter the number of the code page you need in the input box at right and click the ‘SetCodePage’.
PAGE 14
If you need to print the Euro currency symbol, please send the command ‘1f 1b 10 12 12 1’ in the setting tool, to bring out the Euro symbol, then change the code page to number 2: If you need to print the pound currency symbol, you can just change the code page to number 31 - 13 -
PAGE 15
7. Chinese Printing 1) You can switch to the Chinese printing mode in the Advance setting >> Set P80 DIP And under the Chinese model, you can switch to traditional Chinese mode by send command ‘1F 1B 1F 46 4F 4E 54 01’ 8. Factory Reset You can make a factory reset by pressing the button: Turn off the printer. Press the FEED button and hold on.  Turn on the printer at the same time.  Release the FEED button after about 24 seconds. A self-test page will be printed out after the reset finished.