Installation Guide

Installation
WHAT’S IN THE BOX? TOOLS/MATERIALS YOU MAY REQUIRE
Easy Fit Side Mesh Tank Screen
Easy Fit Solar Shield
Easy Fit Screw Down Inlet Ring
Drill
Screws
INSTALLATION
1 - Secure your Inlet Ring by installing screws at 3 points around the perimeter. Make sure to use a screw that is
appropriate for your tank material.
2 -To install the Solar Shield, place it in to the ring so it is suspended in the tank inlet hole with the 3 arms
resting in the location features on the ring. If the arms are not properly seated rotate the solar shield until the
arms drop in to the location features on the ring.
3 - To secure your Easy Fit Side Mesh Tank Screen, place it over the ring so that the 3 clips on the Easy Fit Side
Mesh Tank Screen align with the clips on the Inlet Ring. Push down firmly on each of the 3 clips until you hear
them click into place. Ensure all 3 clips are secured.
4 - Install your inlet pipes as close to the bottom screen as possible, whilst still allowing space for debris
clearance and removal of the Easy Fit Side Mesh Tank Screen for maintenance.
5 - To remove your Easy Fit Side Mesh Tank Screen, lift each of the release tabs until they disengage, and the
screen can be lifted off.
rainharvesting.com