Operation Manual

24H
■ILLUMINATING LIGHT
Illuminating light
for
3 seconds
Illuminating light
A
E
Display the
Lap time
Reset
Stop
Start
The lap time can be
measured repeatedly
by pressing button D.
3. Press button D to go back to the display of the
measurement in progress.
4. Press button C to stop.
5. Press button D to reset.
1. Press button C to start the stopwatch.
2. To display the lap time, press button D during
the measurement. The lap time is shown on
the display while the measurement is still in
progress internally.
D
Stop and restart of the stopwatch can be repeated
by pressing button C.
• To turn the light on, press button E in any mode.
The electroluminescent backlight illuminates
the display for viewing in the dark.
• For 3-second delayed lighting, press button A
in any mode. The electroluminescent backlight
illuminates the display for 3 seconds and turns
off automatically.
C
Go back to the
display of the
measurement in
progress
D
D
C
Accumulated Elapsed Time Measurement
Lap Time Measurement
✼
C C C C
D
Start
Stop
Restart
Stop Reset