Operation Manual

ManualsBrandsLorus ManualsAMYK06

1 Dual time: Time in a different time zone can

be set and displayed.

2. Countdown timer: The timer time can be set

up to 23 hours 59 minutes and 59 seconds in

one second increments.

3. Stopwatch: Measures up to 59 minutes 59

seconds and 99 with 1/100 second readout.

4. Alarm: The alarm can be set to ring on a 24-

hour basis.

5. Time/Calendar: Hour, minute, second, date

and day of the week are displayed.

6. Illuminating light:The built-in

electroluminescent backlight illuminates the

display for viewing in the dark.

INSTRUCTION MANUAL

CAL. YK06(R23 SERIES)

NREYK06

12-2001

■CHARACTERISTICS

The display mode changes over in the following

order by pressing button B.

■BUTTONS AND DISPLAYS

MODE

SELECTION

Second

ILLUMINATING LIGHT

ADJUST/

LAP

AM / PM

Day of the Week

Date

ILLUMINATING LIGHT

FOR

3 SECONDS

START/

STOP

Hour Minute

Summary of content (8 pages)

PAGE 1
2-2001 NREYK06 INSTRUCTION MANUAL CAL. YK06(R23 SERIES) ■CHARACTERISTICS 1 Dual time: Time in a different time zone can be set and displayed. 2. Countdown timer: The timer time can be set up to 23 hours 59 minutes and 59 seconds in one second increments. 3. Stopwatch: Measures up to 59 minutes 59 seconds and 99 with 1/100 second readout. 4. Alarm: The alarm can be set to ring on a 24hour basis. 5. Time/Calendar: Hour, minute, second, date and day of the week are displayed. 6.
PAGE 2
B Time Setting Mode B Normal Time Display Alarm Mode B B Stopwatch Mode Dual Time Mode Countdown Mode B B ■HOW TO SET THE TIME/CALENDAR Day of the Week Date 24H Minute Hour Second 1. Press button B five times to go to the Time Setting Mode. The second digits start flashing. 2. Adjust the second digits by pressing button C. Each press of button C advances the digit by one. To advace the digits quickly, keep button C pressed. 3.
PAGE 3
Choice of 12-Hour/ 24-Hour indication • The time display format in either 12-hour indication or in 24-hour indication can be selected alternatively by pressing button C in Normal Time Display. Under the 12-hour indication format, “PM” mark appears in the afternoon, but no AM mark appears in the morning. Therefore,when setting the hour digits in the 12-hour indication, be sure that AM/PM is correctly set. Under the 24-hour indication format, “24H” mark appears.
PAGE 4
■HOW TO SET THE DUAL TIME • Time in a different time zone can be displayed. Dual Time Mode Indicator C 24H Minute Hour D B Second 1. Press button B twice to go to the Dual Time Mode. Mode indicator “ DT ” appears. 2. Press button D to switch to the Dual Time Setting Display. The hour digits start flashing. 3. Press button C to adjust the hour digits. Each press of button C advances the digit by one. To advance the digits quickly, keep button C pressed. 4.
PAGE 5
4. Press button D to confirm the hour digits and move on to the minute setting. 5. Adjust the minute and second digits with button C and confirm it with button D in the same way as Step 3 & 4. The item to be adjusted is shown in the following order with each press of button D. Hour Minute Second 6. After all the adjustments are completed, press button B to return to the Normal Time Display.
PAGE 6
Accumulated Elapsed Time Measurement Stop and restart of the stopwatch can be repeated by pressing button C. C C C C D Start Stop Restart Stop Reset Lap Time Measurement 1. Press button C to start the stopwatch. 2. To display the lap time, press button D during the measurement. The lap time is shown on the display while the measurement is still in progress internally. 3. Press button D to go back to the display of the measurement in progress. 4. Press button C to stop. 5. Press button D to reset.
PAGE 7
■ L U M I B R I T E WAT C H (dial, hands, buttons, case, bezel, strap, etc.) ✼ If your watch is a LORUS LUMIBRITE watch, it has following features. LORUS LUMIBRITE watches absorb and store light energy from natural and artificial light sources and emit light in the dark. They are made of environmentally friendly material, and therefore, are harmless to human beings and the environment.
PAGE 8
• WATER RESISTANT * If your watch is 200 M/20 BAR, 100 M/10 BAR or 50 M/5 BAR water resistant, it is so indicated on the dial/case back.