User Manual

■
CHARACTERISTICS
1. Time/calendar display: Hour, minute,
second, month, date and day of the week
2. Time indication: 12-hour display format with
PM indicator and 24-hour display format are
available.
3. Stopwatch: The stopwatch can measure
up to 23 hours 59 minutes and 59 seconds
in 1/100-second increments. Split time
measurement is available.
4. Alarm: The alarm can be set to sound at the
designated time on a 24-hour basis.
5. Chime: The chime can be set to sound every
hour on the hour with a single beep.
6. Countdown timer: The countdown timer
can be set up to 23 hours 59 minutes and 59
seconds.
7. Illuminating light: The built-in electro-
luminescent (EL) light evenly illuminates the
display for easy viewing in darkness.
■
BUTTONS AND DISPLAYS
■
HOW TO SET THE TIME/CALENDAR
■
HOW TO USE THE STOPWATCH
The display mode changes in the following order
by pressing Button D.
1. Press Button C to change the display to the
TIME/CALENDAR SETTING mode. (The second
digits start flashing.)
2. Selection of the digits to be adjusted (flash-
ing) is made in the following order by pressing
Button D.
3. One digit (flashing) is advanced with each
press of Button B. (The digits except seconds
are advanced quickly by keeping Button C
pressed.)
• Second setting
Press Button B in accordance with a time
signal. The second digits are reset to “00”
and start counting immediately.
When the second digits count any number
from “30” to “59” and Button B is pressed,
one minute is added and the seconds are
immediately reset to “00.”
Choice of 12-Hour/24-Hour format
• The time display format in either 12-hour
indication or in 24-hour indication can be
selected alternately by pressing button B.
Under the 12-hour indication format, “PM”
mark appears in the afternoon, but no AM
mark appears in the morning. Under the 24-
hour indication format, no mark appears on
the display.
* Measurement and release of split time can be
repeated by pressing button C.
During the measurement, the STOPWATCH signal
keeps flashing.
Press Button D to return to the TIME/CALENDAR
mode.
■
HOW TO SET ALARM TIME
Press Button D two times to go to the ALARM
mode. The ALARM mode indicator appears on
the display.
1. Press Button C to change the display to the
ALARM SETTING mode. The hour digits start
flashing.
2. Press Button B to set the hour digits. One digit
(flashing) is increased with each press of
Button B. The digits are advanced quickly by
keeping Button B pressed.
3. Press Button D to confirm the hour setting and
move on to the minute setting. The minute
digits start flashing.
4. Press Button B to set the minute digits. One
digit (flashing) is increased with each press
of Button B. The digits are advanced quickly
by keeping Button B pressed.
5. Press Button D to confirm the minute setting
and move on to the time zone setting.
6. Press Button B to select the time zone.
7. Press Button C to complete the alarm setting.
Press Button D to go to the STOPWATCH mode.
The STOPWATCH mode indicator appears on
the display.
STOPWATCH OPERATION
Standard Measurement
Split Time Measurement
B
CC
BD
Start
Split
Reset
Split
Release
Stop
B
B
C
Start
Stop
Reset
NREZ009
5-2015
CAL. Z009 (R23 SERIES)
Press Button D to return to the TIME/CALENDAR
mode.
PM
indicator
Hour
Day of the week
Chime
signal
Stopwatch
signal
Date
Minute
Second
Timer
signal
Alarm signal
B (START/STOP)
A (LIGHT)
D (MODE)
C (SET)
4. After all the adjustments are completed, press
Button C to return to the TIME/CALENDAR
mode.
TIMER
TIME/CALENDAR
STOPWATCH
ALARM
SECOND TIME ZONE
D
D
D
D
SECONDS
DATE
12/24-HOUR
FORMAT
MONTH
MINUTES
HOURS
DAY OF THE
WEEK
D
D
D
D
D
D
D
DATE SETTING MONTH SETTING
TIME/CALENDAR mode
12/24 FORMAT SETTING
DAY OF THE WEEK
SETTING
MINUTE SETTING
HOUR SETTING
SECOND SETTING
D
D
D
C
C
D
D
D
B
B
B
B
B
B
B
D
STOPWATCH mode
indicator
STOPWATCH
signal
D
B
C
NREZ009.indd 1 15/05/07 16:29