Datasheet

Lorlin Electronics Ltd, Harwood Industrial Estate, Harwood rd, Littlehampton, W. Sussex BN17 7At England
Tel [phone] Fax [phone] E-mail [e-mail]
2
STANDARD SPINDLE DETAILS
TO ORDER PLEASE SPECIFY:
STANDARD ANGLES OF
SCREWDRIVER SLOTS
TYPICAL SPINDLE DETAILS
Standard screwdriver slots are
1.2mm wide and 1.5mm deep
.
1. Switching Code
2. Imperial or Metric Spindle Diameter
3. Dimension (B) Spindle length from Mounting Face
4. Thread Required (C)
5. Spindle Flat length if required (D)
6. Angle of Flat (E)
7. Spindle Flat Depth (F)
8. 16 Position or No Stop Version
9. Contact Plating: Silver/Gold Flash/2.5 microns
Gold Plate
10. Location Lug if required
CUSTOMER TO COMPLETE OR DELETE AS REQUIRED
A B C
IMPERIAL Ø6.35 Ø9.52 x 32TPI
METRIC Ø6.00 M10 x 0.75
D E F
IMPERIAL
METRIC
A B C D E F
BASIC
TYPES
SPINDLE
DIAMETER
SPINDLE
LENGTH
FROM
MOUNTING
FACE
8mm
LONG
BUSH
SPINDLE
FLAT
LENGTH
ANGLE
OF
SPINDLE
FLAT
SPINDLE
FLAT
DEPTH
IMPERIAL 6.35mm 38mm
9.52 x
32TPI
30mm 90º 5.5mm
METRIC 6.00mm 50mm
M10 x
0.75
No Flat --- ---
BCK BINARY CODED ROTARY SWITCH
EXAMPLE
Screwdriver slot level with top of threaded fixing
bush 1.2mm wide x 1.5mm deep (standard) at 90º
(standard)
Orientation with location
lug in position shown.