Owner's Manual

48
Using the Main Menu
• Sender Password: Enter your email
server’s password.
• Receiver Email: E
nter the recipient’s
email address.
• Interval: Ent
er the interval the DVR waits
before sending a new email notification.
2 Cl
ick Ap
ply to save your settings.
Changing the Mobile Connectivity
Port, User Name, and Password
To connect to your DVR using a mobile
device, you must complete the entire
remote setup process described in
“Setting up your DVR for Remote
Connectivity” on page 56.
Use the steps below to change your
Mobile Port or the user
name and
password used to connect with a mobile
device.
To configure mobile connectivity
settings
:
1 Click the Mobile
tab.
2 If you want to change the user name and
pas
sword used to connect to the DVR using
a mobile device:
• Under Us
er Name, ent
er a new user
name. Under Password, enter a new
password.
• By default, the user name is admin and
the pass
word is 0000 to connect with a
mobile device.
3 T
o change the Mobile port, click the field
bes
ide Mobile Port to enter a new port.
• The default Mobile port is 1025. This
must
be port forwarded on your router to enable
remote access. Note that 1025 is
represented as "01025".
4 Click Apply
to save your settings.
5 Right-click until yo
u have exited all menus.
You will be prompted to restart.
Configuring DDNS settings
You must create a DDNS account and
enter your DDNS settings into the DVR
before you can remotely connect to your
system. For details on creating a DDNS
account, see “Setting up your DVR for
Remote Connectivity” on page 56.
To configure DDNS settings:
1 Click the DD
NS tab
.
2 Configure the following:
• DDNS: Sel
ect Enable
• Server: Sel
ect LOREXDDNS (default).
• Domain Name: Ent
er the Domain name/
URL Request you received in the email
after registering for DDNS.
• User Name: Enter y
our DDNS User Name.
• Password:
Enter your DDNS Device
password.
3 Click Apply
to save your settings.
NOTE: Please allow 10~15 minutes for the
DDNS
servers to update with your
new DDNS address before
attempting to connect.