Quick Start Manual

Installation (Continued)
5. Remove the rubber plug on the bottom of
the camera base and run the single end of the
cable through the bottom of the camera base.
Attach the camera base to the pendant cap
using the camera attachment screws (4x).
5
Camera base
Camera
attachment screws
(pre-attached)
6. Connect the cable to the camera (see the camera
instruction manual for details).
Attach the camera to the base using the base
attachment screws (3x) then reattach the dome cover
by rotating it clockwise.
WARNING - Make sure power is
disconnected before connecting the cable.
Camera will begin moving immediately
when power is connected.
6
Base attachment screws
Dome cover
Camera
7. Remove the protective vinyl sheet from the
dome cover.
7
MNTV0XWL_INSTALLATION_DIAGRAM_EN_R1 Page 2
Vinyl sheet
Dimensions With Camera (mm)
8 3 . 8 8
1 2 5 . 0 0
1 8 7 . 5 8
48. 80
187. 65
21. 50
75. 91
1 4 2 . 2 3
147. 94
Weight: 1.4kg / 3.0lbs.