Owner's Manual

14
Installation
6. Attach the camera base to the
ceiling using the included
mounting screws (x4).
Mounting
screws
6
NOTE: Use the included drywall
anchors if installing the camera in
drywall.
7. Connect the 6-pin connector to
the camer
a.
6-Pin
Connector
7
NOTE: Make sure power adapter is
disconnected before connecting
the 6-pin connector. Camera will
begin moving immediately when
power adapter is connected.
8. Attach the camera to the
base using the ba
se
att
achment screws (3x).
Base attachment
screws
8