Owner's Manual

12
Installation
3.4 CEILING INSTALL (INDOOR ONLY)
Make sure to disconnect the power adapter before installing
the camera. Camera will begin moving immediately when
power adapter is connected.
Camera is not weatherproof if installed using this method.
Use the included wall mount for outdoor installations.
Camera can be installed directly to a ceiling.
To install the camera:
1
Foam Pad
Cable and
mounting screw
cutouts
1. Remove the cutouts for the
cable and mounting screw
holes and place the foam pad
onto the bottom of the camera
base with the cutouts aligned
with the holes on the bottom of
the camera.
2. Rotate the dome cover
c
o
unterclockwise to remove.
Dome cover
2