Owner's Manual

11
Installation
English
6. Connect the cable to the camera
(see “Connecting the Camera” on
page 2). Attach the camera to the
base using the base attachment
scre
ws (3x) then reattach the
dome cover by rotating it
clockwise.
6
NOTE: Make sure power adapter is
disconnected before connecting the
6-pin connector. Camera will begin
moving immediately when power
adapter is connected.
7. Remove the protective vinyl sheet
fr
om the dome c
over.
7
• For details on DVR setup, see
“Controlling the PTZ Camera with
your DVR” on page 16.