SDS

Safety Data Sheets (SDSs)
Page 5 of 10
Carbon monoxide(CO)
Carbon dioxide
Other irritating and toxic gases.
Hazar dous Combustion Pr oducts
Carbon oxides.
Explosion Data
Sensitivity to Mechanical Impact No
Sensitivity to Static Discharge No
Protective Equipment and Pr ecautions for Fir efighter s
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or
equivalent) and full protective gear. For example: Wear self-contained respiratory protective device. Wear
suitable protective clothing and eye/face protection.
Special hazar ds ar ising fr om the substance or mixtur e:
Battery may burst and release hazardus decomposition products when exposed to a fire situation. Lithium ion
batteries contain flammable electrolyte that may vent, ignite and produce sparks when subjected to high
temperature(>150
℃
), When damaged or abused(e.g. mechanical damage or electrical overcharging); may
burn rapidly with flare-burning effect; may ignite other batteries in clothes proximity.
6. ACCIDENTAL RELEASE MEASURES
Per sonal pr ecautions, pr otective equipment and emer gency procedures
Personal Precautions Avoid contact with eyes.
Refer to section 8 for personal protective equipment. Ensure adequate ventilation. Remove all sources of
ignition.
Evacuate personnel to safe areas.
Envir onmental pr ecautions
Environmental Precautions Refer to protective measures listed in Sections 7 and 8.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Methods and mater ial for containment and cleaning up
Methods for Containment Prevent further leakage or spillage if safe to do so.
Methods for Cleaning up Use personal protective equipment. Dam up. Cover liquid spill with sand, earth or
other Non combustible absorbent material. Pick up and transfer to properly labeled containers. Clean
contaminated surface thoroughly.
7. HANDLING AND STORAGE
Precautions for safe handling
Handling Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin,
eyes and clothing. Wear personal protective equipment.
Wash thoroughly after handling. Use this material with adequate ventilation.
The product is not explosive.