SDS

D
〔
ML414H
-
039
SECTION 9: Physical and Chemical Properties
Shape
Coin type
Chemical System
Lithium-Manganese composite oxide/ Lithium-Aluminium alloy
Rechargeable
YES / NO
SECTION 8: Exposure Controls / Personal Protection
The battery is sealed with a metal can in order to avoid leakage of harmful gas or liquid. When handling in
accordance with the preceding paragraph, usually no protective equipment is required. Wear protective
equipment when liquid (electrolytic solution) leaks from the main body.
Respiratory Protection:
Hands Protection:
E
y
e Protection:
Protective mask with a filter preferably
Safety gloves
Safet
y
g
o
gg
les and/or
g
lasses for chemicals
When normal handling, this battery is not noxious to the human body because the content sealed
with cases.
SECTION 12: Ecological Information
There is no ecological information particularly.
*
It is reported that batteries leaked almost no metal ingredients even if buried in the ground.
SECTION 13: Disposal Considerations
Dispose of the battery in accordance with the respective national, federal, state, and local regulations.
SECTION 14: Transport Information
SECTION 10: Stability and Reactivity
Stability: Stable at normal handling
Condition to Avoid: See section 7
SECTION 11: Toxicological Information
This product can be transported as non-dangerous goods because it meets the transportation
conditions listed in the Special provision 188.
＜Lithium content＞ Less than 1g.
※The Lithium content of this battery is 0.0004 g.
＜Safety Certificate＞
Each cell or battery must be of the type proven to meet the requirements of
each test in the UN Manual of Tests and Criteria, Part III, subsection 38.3.
*This battery was manufactured by the factory that acquired ISO 9001 based
on the quality program , and passed the UN 38.3 test.
United Nations Number
UN3090
(Batteries contained in equipment; or batteries packed with equipment; UN3091)
Shipping Name
Lithium metal batteries
UN Hazard Classification
Class 9
＜Packaging for preventing
short circuit ＞
Except when batteries contained in equipment, it must be to prevent
short circuit and wrapped in a strong container or packaging.
＜Label & Marking display＞ Appropriate labeling and marking are required for each package.
＜Packing Drop test＞ Except when batteries contained in equipment, each package must be
capable of withstanding a 1.2 m drop test.
3 / 4