User's Manual

Using the Main Menu17
If you want to use your own email server (advanced):
1. Under Mail Select, select Customize.
2. Configure the following:
• SMTP Server: Enter the SMTP server address.
• Port: Enter the port used by the SMTP server.
• Username: Enter the SMTP user name.
• Password: Enter the SMTP password.
• Anonymous: Check if your server supports anonymous log ins. Otherwise, leave this
unchecked.
• Receiver: Enter the email address that will receive alerts.
• Sender: Enter the sender’s email address.
• Subject: Enter the subject line for the email alert.
• Attachment: Check to include an image attachment of the camera.
NOTE
You must enable the Snapshot option for motion detection on each camera you would to receive attach-
ments. For details, see 12 Motion Detection, page 37.
• Encrypt Type: Select SSL or TLS if your server uses encryption. Select None if your
server does not use encryption.
• Interval: Enter the interval between alert emails.
• Health Enable: Check to enable health check emails. Health check emails will be sent
periodically to ensure that the system is functioning normally. Enter the interval in mi-
nutes for health check emails.
3. Click Test to send a test email.
4. Click Apply to save settings.
17.6.4 Configuring Switch Settings (Advanced)
Configure the networking settings for the internal PoE switch.
CAUTION
It is recommended to leave this menu on the default settings. Changing the information in this menu may disrupt
the connection to the cameras.
#LX400113; r. 9.0/57192/57197; en-US 76