User's Manual
Table Of Contents
- 1 Important Safeguards
- 2 Package Contents
- 3 Recorder Overview
- 4 Basic System Setup
- 5 Camera Installation
- 6 Using the Mouse
- 7 Setting the Date & Time
- 8 Using the On-Screen Display
- 9 Recording
- 10 Playback
- 11 Backup
- 12 Motion Detection
- 13 Active Deterrence
- 14 Smart Motion Detection
- 15 Face Detection
- 16 Managing Passwords and User Accounts
- 17 Using the Main Menu
- 17.1 Main Menu Overview
- 17.2 Setting the Monitor Resolution (Display)
- 17.3 Configuring Sequence Mode
- 17.4 Camera Menu
- 17.5 Information Menu
- 17.5.1 Version Information
- 17.5.2 Hard Drive Information
- 17.5.3 BPS
- 17.5.4 System Log
- 17.5.5 Alarm
- 17.5.6 Online Users
- 17.5.7 Network Load
- 17.5.8 Network Test
- 17.5.9 Saving Your System Configuration to a USB Thumb Drive
- 17.5.10 Restore Default Settings
- 17.5.11 Upgrading Firmware Manually
- 17.5.12 Automatic Firmware Upgrades
- 17.6 Network Settings
- 17.6.1 Selecting DHCP or Static IP Address (TCP/IP)
- 17.6.2 Configuring System Ports (Connection)
- 17.6.3 Configuring Email Alerts
- 17.6.4 Configuring Switch Settings (Advanced)
- 17.6.5 P2P Setting
- 17.6.6 Performing Smart Search for Safeguard
- 17.6.7 Configuring Smart Plan
- 17.6.8 Configuring Safeguard
- 17.6.9 Configuring Video Loss Settings
- 17.6.10 Configuring Hard Drive Warnings
- 17.6.11 Configuring Network Warnings
- 17.6.12 Searching Event Logs
- 17.6.13 Configuring Pre-Recording
- 17.6.14 Formatting the Hard Drive
- 17.6.15 Configuring Hard Drive Type
- 17.6.16 Configuring Record Estimate (Recording Calculator)
- 17.6.17 FTP (Advanced)
- 17.6.18 Configuring General System Settings
- 17.6.19 Configuring Holidays
- 17.6.20 Configuring IP Filter
- 17.7 Shutdown
- 18 Connecting Remotely using the Lorex Home Mobile App
- 19 Smart Home & Voice Assistance
- 20 Pan/Tilt/Zoom (PTZ) Cameras
- 21 Connecting Audio Devices
- 22 Replacing the Hard Drive
- 23 DDNS Setup (Advanced)
- 24 Troubleshooting
- 24.1 Top Reasons Your Lorex Camera May Lose Video or Go Black
- 24.1.1 Going over PoE budget will result in video loss
- 24.1.2 When to use a PoE Switch?
- 24.1.3 Not enough power or total loss of it
- 24.1.4 Power surge and interference
- 24.1.5 Not supported display output
- 24.1.6 Twisted, bent or damaged cables
- 24.1.7 Outdated firmware and hardware
- 24.1.8 Issue with compatibility
- 24.1.9 Low internet bandwidth
- 24.1 Top Reasons Your Lorex Camera May Lose Video or Go Black
- 25 Technical Specifications
- 26 Notices
Playback10
9. Playback Controls:
•
Play / Pause
•
Stop
•
Play Backwards
•
Previous Frame: Go to the previous frame when video is paused.
•
Next Frame: Go to the next frame when video is paused.
•
Slow Playback: Click repeatedly to slow the video down by half speed up to 16×
slower than normal. Click again to return to regular speed.
•
Fast Playback: Click repeatedly to double the speed of the video up to 16× faster
than normal. Click again to return to regular speed.
•
Area Search: Click to select an area of the camera image and play back all record-
ings with motion in the selected area. For full details, see 10.3 Area Search, page 28.
•
Add Bookmark: Bookmark recordings for easy retrieval.
•
Digital Zoom: Click to enable digital zoom. Click-and-drag over the camera image
to zoom in on the selected area. Right-click to return to the full camera image. You can
then repeat to zoom in on a different area, or click the icon again to disable zoom.
•
Show/Hide Smart Search Rules: Click to show/hide active areas for smart detec-
tion of people and vehicles during playback.
•
Volume / Mute: Click on the volume bar to set the volume for audio in playback.
Click the icon to mute/unmute.
NOTE
◦ You must be viewing an audio camera in single channel to hear audio. You must also be using an
HDMI monitor with built-in speakers, or connect an external speaker to the recorder in order to hear
audio.
◦ Audio recording and / or use of listen-in audio without consent is illegal in certain jurisdictions. Lor-
ex Corporation assumes no liability for use of its products that does not conform with local laws.
• Video Clip: Back up a custom video clip to a USB flash drive (not included). For
full instructions, see 10.4 Video Clip Backup, page 29.
10.3 Area Search
Play back all recordings from a single channel with motion in a specific area of the camera
image.
#LX400113; r. 9.0/57192/57197; en-US 28