User`s guide

40
Pairing cameras
Pairing cameras
The camera included with the video monitor has already been paired up with the video
monitor. If for any reason your monitor and camera are not paired up, or you wish to add
additional cameras, follow the directions below.
To pair a camera to the video monitor:
Pair Button
Press the Pair button
during the pairing
process with the video
monitor.
1 Place the camera and video monitor 12
inches apart. Turn on the camera first and
then the video monitor.
2 Press the Me
nu button on the monitor,
then select Pairing and press the OK
button.
3 Select an available channel, and press the
OK butt
on.
NOTE: By defa
ult, the camera included with
the system is paired to channel 1.
4 Press the PAIR button
on the camera
within 30 seconds.
• You should immediately see video from the
ca
mera on the video monitor.
5 OPTIONAL: T
o
pair multiple cameras,
repeat steps 2~4, selecting a different
channel in the pairing menu.
You can add a maximum of four (4) wireless
ca
meras to the video monitor. Add-on
cameras are available from
www.lorextechnology.com (accessory #
LW2401AC1, LW2451AC1, LW2401AC2).