User`s guide

13
Configuring your video monitor
Changing the date and time
To adjust the video monitor’s date and time:
2011-02-14
09:54:30
1 Press the Menu button on the video monitor.
2 Select Settings (
) and then press the OK
button.
3 Se
lect Date
& Time and then press the OK
button.
4 Use
the joystick to configure the Year, Month,
Day, Hour
s, Minutes, and Seconds.
• Press up/down on the joystick to adjust the values.
• Pres
s left/right to move between the year, month, and date.
• Time is in 24-hour format.
5 Press the OK but
ton to save your changes, or press Menu to exit the menu without saving
your changes.
Adjusting the alarm volume
The video monitor can be set to ’beep’ when the
camera detects audio triggers (e.g. a loud
noise). You can adjust how loud the video
monitor beeps when the alarm triggers.
NOTE: To disable the alarm ’beep’ turn
the volume all the way down.
NOTE: If you have the LW2401AC2 accessory
camera, the alarm activates when motion
is detected.
This is useful if you want to monitor activity in an
area, but cannot
keep your eyes on the video
monitor.
To change the video alarm volume:
1 Press the Me
nu button on the video monitor.
2 Select Alarm Vo
lume ( ) and then press the OK button.
3 Press left and right on the joystick to adjust the alarm volume.
4 Press the OK b
utton to save your settings.