User`s guide

8
Getting started
Reading the power indicator LED
The power indicator LED glows green when the monitor is powered on. When the battery
is low, the power LED blinks.
Power LED
Sequence view
In Sequence view, the monitor switches between paired cameras every six seconds. For
example, the monitor displays channel 1 for six seconds, then channel 2 for six seconds
and so on. The monitor only switches to channels that are paired with a camera.
To enable Sequence view:
• Press the SEQ/Quad
button once to enter Sequence view.
To exit Sequence view:
• Press the CAM button.
Viewing multiple cameras (Quad view)
You can view all of the paired cameras in Quad view. The video monitor supports a
maximum of four cameras.
NOTE: Audio monito
ring is not available in Quad view.
SEQ/Quad button
Camera 1
Camera 4
Camera 3
Camera 2
How Sequence View works