Quick Start Manual

ManualsBrandsLorex ManualsAccessoriesLorex Lorex Live Sense wireless video Baby Monitor Add-On camera

FOR MORE INFORMATION:

www.lorextechnology.com

LW2401AC1 QSG_EN_R1 Page 1

LORE X

Contents:

Before you install the camera, carefully plan where and how it will be positioned,

and where you will route the cable that connects the camera to the power adaptor.

Avoid installing in a location which requires the wireless signal to pass through

cement, concrete and metal structures. This will reduce the transmission range.

TIP

LIVE SD 3.5

Add-on Camera

Quick Start Guide

Day/Night

Multi-View Secure

Long Range

LOREX

1. Connect the Power Adaptor to the 5V Input on the back of

the camera.

2. Connect the power adapter to a power outlet.

OPTIONAL: You can use ‘AA’ batteries or a rechargable battery pack to power

the camera. Please refer to Appendix A in the Owner’s Manual for instructions.

Battery operation is suggested for temporary monitoring only.

3. Slide the power switch to the ON position.

Powering the Camera

Pairing the Camera

NOTE:

• Only use the included power adapter to charge the camera(s).

2 3

Place the camera and video monitor 12 inches apart.

Turn on the camera first and then the video monitor.

Press the Menu button on the monitor, then select

Pairing and press the OK button.

Select an available channel, and press the OK button.

NOTE: By default, the camera included with the

system is paired to channel 1.

You should immediately see video from the camera on

the video monitor.

Press the Pair button behind the camera within 30

seconds.

NOTE:

• To pair multiple cameras, repeat steps 2~4,

selecting a different channel in the pairing menu.

• You can add a maximum of four (4) wireless

cameras to the video monitor.

Camera Power Adapter

Security Clips

Pair Button

Press the Pair button during

the pairing process with the

video monitor.

Summary of content (1 pages)

PAGE 1
LOREX LIVE SD 3.5 Add-on Camera LORE X Day/Night Long Range Multi-View Secure Quick Start Guide Contents: TIP Security Clips Camera Power Adapter Before you install the camera, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adaptor. Avoid installing in a location which requires the wireless signal to pass through cement, concrete and metal structures. This will reduce the transmission range. Powering the Camera 1.