Installation Guide

LH010 ECO BlackBox Series Quick Setup Guide - English - R1
INTERNETREMOTEMONITORING
INTERNETREMOTEMONITORING
INTERNETREMOTEMONITORING INTERNETREMOTEMONITORING INTERNETREMOTEMONITORING
Continued
Continued
Continued
Continued
5
Openyourwebbrowser(InternetExplorerbydefault)and
enter http://www.lorexddns.netintheaddressbar.
DDNS (Dynamic Domain Name System) Set-up
http://www.lorexddns.net
1: Populate the Router Database
3
TheAutoPortForwardingWizard
automatically populates a list of
currentrouters,anddetectsthe
numberofconnectedrouters.
1. Click the Nextbuttonafterthe
software detects your router
configuration.
2.UnderRouter IP,clicktheDetect Router IP button.
Therouter’sIPpopulatesintheblankfield.
3. Under Username and Password,entertherouter’s
username and password.
4. Under IP,entertheIPaddressofyour
LorexdeviceasrecordedinStep3-1.
5. Under Port,entertheport
number(s)thatrequireforwarding
(80,9000,1025).
6. Click Next to continue.
80Your IP
9000
1025
NOTE: Click the Auto Detectbuttonifyouhavea
LinksysorNetgearrouter(thisworkswithmostmodels).
2: Enter your Router Settings
1.UndertheRouterdrop-downlist,selectthemodelofyour
router OR click the Searchbuttontoenterthenameof
your router model.
NOTE: Ensure you select the proper model and firmware
numberoftherouter(asitappearsonthebackoftherouter)
IMPORTANT:Defaultportsthatmustbeportforwarded
for remote access:
Port 80(HTTPPort)
Port 9000 (Client Port)
Port 1025(MobileConnectivityPort)
4: Test your Connection
1. Click the Test Your Connection button.Yoursystem’s
defaultbrowseropensandconnectstoyourLorexdevice.
NOTE: Ensure that Internet Explorer is your system’s
defaultinternetbrowser.
3: Update the Router Settings
1. Click the Update Router
button.Theprogrambegins
updating the router settings.
Thismaytake20-30seconds.
2.Closetheupdate window
when the update finishes.
NOTE: You may have to
manually save your router settings
after the software makes the
requiredchangestoyourrouter.
Auto Port Forward Wizard
1
TheLorexAutoPortForwardingWizardisasoftwarethat
automates router port forwarding.
NOTE: YoumustbeonthesamenetworkastheDVRwhen
settinguptheDDNS.
Youmusthavethefollowingbeforeyouconfigurethesoftware:
1. Your router’s model and versionnumbers
2.Yourrouter’suser name and password
3. Your Lorex device’s IP address (recorded in Step 3-1)
4. Your Lorex device’s portnumbersthatrequireportforwarding
(80,9000,1025)
Optional: Manual Port Forward
4
If you were unable to port-forward your router
automatically using the wizard, you will need to
manually forward ports 80, 9000 and 1025 to
your DVR’s IP address.
Anexampleofaportforwardingscreenisshownfor
illustration purposes.
Allroutersaredifferent.Toportforwardyourrouter,pleaserefer
to your router’s user manual.
80
80
HTTP
EXAMPLE
9000
12
12
Media
9000
1025
12
Mobile
1025
STEP4
STEP4
STEP4
STEP4
STEP4
REMOTE INSTALLATION GUIDE
Time: 30 Minutes
Skills - IntermediateHardware:
PC
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
9
Enable DDNS on the DVR
1. Click on Main Menu fromthemenubar,thenclickNetwork.
2. ClicktheDDNStab.
3. Select Enable in the DDNSdrop-downmenu.
NOTE:Pleaseallow10~15minutesfortheDDNSserverstoupdate
withyournewDDNSaddress.ThisisnormalfortheDDNSsystem.
Click Apply to save your settings.
Enter the following into the DDNS Setup menu:
•Domain Name: Enter the Domain Name/URL
RequestthatwasemailedtoyouafterDDNSregistration.
•User Name: Enter your DDNS User Name that was
emailedtoyouafterDDNSregistration.
•Password: Enter your DDNS Device Password that
wase-mailedtoyouafterDDNSregistration.
Enter the DDNS Information into the DVR
10
Select Enable
Domain Name:
EnterDomainName/
URLRequest
User Name: Enter
DDNSUserName
Password: Enter
DDNSDevicePassword
1.Insertthesystem’ssoftwareCD,andfollowtheinstructions
to launch the Lorex Auto Port Forwarding Wizard
software.
Installation
2
NOTE: TheWizardisPCcompatibleonly.
 Macusers,pleasegotoStep4-4.
Congratulations! You have completed Step 4 successfully. You
cannowconnectovertheinternettoviewandplaybackvideo.
1-21082012
Instant
Mobile
Viewing
Forremoteconnectivityusingcompatiblesmartphones
andtabletsrefertotheinstructionmanual.Makesure
tocompleteStep4entirely.Toconnectremotelyusing
Mac,refertotheInstructionManual.
Shouldyourequirefurtherassistance,LOREXTech
Supportisavailabletoassistyou.Makesureto
register your product prior to contacting support at :
www.lorextechnology.com/support
1. Click Step 1
2.CreateanewMyLorexaccountor
sign in using an existing account.
6
Create Account
7. Click SavetoregisteryourproductforDDNS.ADDNS
registrationconfirmationemailwillbesenttotheemail
addressusedtoregisterforMyLorex.
NOTE:URLRequestshouldnotbemorethan15characters.
6.FillouttheMy
DDNSform:
• Product Warranty:
Select the product
warranty you created
in the previous steps.
• Device Name: Enter a name for your device. You can
enteryourname,businessname,oranythingofyourchoice.
• MAC Address:EntertheMACaddressofyourLorex
systemrecordedinStep3-1.
• URL Request:Enterthewebsiteaddressthatwillbe
used to connect to your Lorex system.
Complete New Account Information
7
NOTE:WarrantyRegistrationisrequiredforDDNS.
3.UnderYourAddress,
select an address or click
Enter a New Address
to create a new address.
Fill in your address
information and click
Create Address.
1. Click Warranties.
2. ClickActivate Warranty.
4. Fill in the warranty registration
form with your product and
purchase details and click Save
Warranty. Check the sticker
underneath your DVR for the
ProductModelNumberand
SerialNumber.
5. Click Set Up a New DDNS.
AnautomatedREGISTRATION CONFIRMATION E-MAIL
willbesenttoyouremail.Printandsavethisconfirmation.You
willneedtoenteritintoyoursystemtoenableremoteaccess.
8
Registration E-mail
DomainName/URLRequest:tomsmith
DDNSUserName:tomsmith
DDNSDevicePassword:(yourpassword)
EXAMPLE
3. Enter the following information in each field:
4. Click Login to access your DVR. Lorex Client 11 connects to your
DVR and streams live video from your cameras.
11
1. Install Lorex Client 11 onto your computer using the included
softwareCD,ifyouhavenotdonesoalready.
2.Onceinstalled,double-clickonthe
Lorex Client 11 icon from your desktop.
TheDVRloginscreenwillappear.
Logging into the System Remotely
IP Address: Enter the DDNS address of your DVR. (if your URL
Requestistomsmith enter tomsmith.lorexddns.net)
User Name:Thedefaultusernameisadmin.
Password:Bydefault,thepasswordisleft blank.
Client Port:Bydefault,thisis9000.
EntertheDVR’sDDNSaddress
EntertheDVR’sUserName
(default: admin)
Enter the DVR’s Password
(bydefault,thisis left blank)
Enter the DVR’s Client Port
(default: 9000)
Forafullexplanationofallbuttonsandfeaturesof
Lorex Client 11,pleaserefertotheInstructionManual.