Quick Start Guide
4. Set up Face Unlock.
Face Unlock – This feature allows you to unlock the Lorex Home Center with the
built-in camera. Make sure that the camera lens is not covered, that nothing is covering
your face, and that you position your face directly in front of the camera. A reasonable
amount of light is required to have this function work properly. You also have the option
to skip this step and cover the camera with the built-in lens cover for privacy.
Important: Only one device owner’s face can be stored.
5. Power on your new cameras and/or doorbell near the Lorex Home Center.
Note: If you are adding existing cameras that were previously set up through the Lorex
Home app, you will need to ensure that you are running the latest Lorex Home
compatible rmware and then reset the cameras. See page “Troubleshooting: Adding/
Updating Cameras” steps 7-10 for details. This will not erase any of the recordings
stored on the cameras.
6. Choose your preferred connection set up method from the following three options:
Wired Wireless Oine