User's Manual
Table Of Contents
- 1 Important Safeguards
- 2 Package Contents
- 3 Recorder Overview
- 4 Basic Setup
- 5 Using the Mouse
- 6 Using the Recorder’s On-Screen Display
- 7 Recording
- 8 Playback
- 9 Search & Backup
- 10 Managing Users, Passwords and Permissions
- 11 Pairing Cameras
- 12 Storage
- 13 Using the Main Menu
- 13.1 Main Menu Overview
- 13.2 Settings Menu
- 13.2.1 Changing a Camera’s On-Screen Display (OSD)
- 13.2.2 Enabling / Disabling Cameras
- 13.2.3 Camera Firmware
- 13.2.4 Enabling Audio
- 13.2.5 Changing the Display Resolution
- 13.2.6 Menu Transparency
- 13.2.7 Configuring Basic Network Settings
- 13.2.8 Setting up Email Notifications
- 13.2.9 Setting an Email Schedule
- 13.2.10 Configuring Motion Detection Settings
- 13.3 System Menu
- 13.4 Advanced Menu
- 14 Connecting to Your System Using PC or MAC
- 15 Connecting to Your System Using Smartphone or Tablet Apps
- 16 Viewing Backed Up Video on PC/Mac
- 17 Smart Home & Voice Assistance
- 18 DDNS Setup (Advanced)
- 19 Troubleshooting
- 20 Technical Specifications
Using the Main Menu13
1. From the live viewing screen, click > Advanced > Maintenance.
2. Click Load Settings.
3. The drive menu appears and displays the contents of the USB flash drive.
• Navigate to the system settings file you want to import, then click OK to begin.
• A warning message appears to inform you the system will reboot in order to properly im-
port your saved settings. Click OK to proceed.
NOTE
For more details on using the drive menu, including a full overview of buttons and their functions, see 9.3
Drive Menu Controls, page 31.
13.4.5 IPC Upgrade
Manually upgrade IP camera firmware. Typically, this will not be required unless directed to do
so by technical support.
Prerequisites:
• The camera should be close to the NVR and the battery should be 40% or up.
To manually upgrade the camera’s firmware:
#LX400115; r. 3.0/57178/57178; en-US 62