SDS

Li-MnO2 Button Cell(Lithium Metal Battery)
Safety Data Sheet
This document has been prepared in accordance with the SDS requirements of the OSHA Hazard Communication Standard 29 CFR 1910.1200
16/09/2019
EN (English US)
5/10
Skin and body protection:
Under normal condition of use and handling no special protection is required for sealed battery. It is recommended to wear
appropriate protective clothing when the battery case is broken.
Respiratory protection:
If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn.
Positive-pressure supplied air respirators may be required for high airborne contaminant concentrations. Respiratory protection
must be provided in accordance with current local regulations.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
:
Solid
Color
:
Metallic color.
Odor
:
Odorless.
Odor threshold
:
No data available
pH
:
No data available
Melting point
:
No data available
Boiling point
:
No data available
Flash point
:
Not applicable
Relative evaporation rate (butyl acetate=1)
:
No data available
Flammability (solid, gas)
:
Not flammable
Vapor pressure
:
Not applicable
Relative vapor density at 20 °C
:
No data available
Relative density
:
No data available
Solubility
:
No data available
Log Pow
:
No data available
Auto-ignition temperature
:
No data available
Decomposition temperature
:
No data available
Viscosity, kinematic
:
Not applicable
Viscosity, dynamic
:
Not applicable
Explosion limits
:
Not applicable
Explosive properties
:
Not an explosive
Oxidizing properties
:
No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition. Avoid contact with incompatible materials
10.5. Incompatible materials
Oxidizing agent. Strong acid. Strong base.
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity
:
Not classified