Owner's Manual

43
Using the Main Menu
To set the hard drive recording mode
(loop or linear):
1 Cl
ick HDD.
2 Click the
checkbox under Select to choose
the drive you wish to configure.
3 In
the Overwrite drop-menu, select AUTO
for the system to continually loop the
recording (recommended).
• If desired, select the duration you want the
har
d drive to store the content for "linear"
recording. Select from 1hr ~ 90 days.
4 Cl
ick Apply to save your settings.
To format a USB memory stick:
1 Insert a USB
memory stick into the rear
panel of the system.
2 Cl
ick HDD.
3 Under
the Select checkbox, select the USB
memory drive.
4 Cl
ick Format USB.
Configuring Alarm Settings
The Alarm settings menu allows you to
configure how the system behaves
when it detects motion, video loss, or a
full hard drive.
Prerequisites:
Enable Alarm recording
in your recording schedule. For details,
see “Adjusting Recording Modes
(Continuous/Schedule/ Alarm
Recording)” on page 37.
To enable/disable the system buzzer:
1 F
rom the Device menu, click Alarm.
2 In
the Buzzer drop-down menu, select ON/
OFF to enable or disable the system
"buzzer" (beep).
Alarm