2K QHD Wire-Free Security System Quick Start Guide EN H871T6D-4BA2-E_QSG_EN_R1.indd 1 lorex.
Welcome! Thanks for your purchase of the 2K QHD Wire-Free Security System. Here’s how to get started. H871T6D-4BA2-E_QSG_EN_R1.
Contents 1 2 3 4 5 6 7 8 9 H871T6D-4BA2-E_QSG_EN_R1.
1 Package Contents Wire-Free Camera* Charging Adapter Mounting Bracket* Anchors (x2)* Screws (x2)* Lorex Home Hub Lorex Home Hub Power Adapter Charging Cable Mounting Template* Ethernet Cable Battery Pack* Mounting Plate* Memory card (pre-inserted)** Attention: A REGULATED UL / CSA APPROVED power supply is REQUIRED for use with this camera (included). Use of a non-regulated, non-conforming power supply can damage this product and voids the warranty.
2 Overview: Camera Front View Back View Warning light Power port Status indicator Microphone Mounting screw thread Pairing button Light sensor Motion sensor Speaker Battery compartment Battery cover H871T6D-4BA2-E_QSG_EN_R1.
Overview: Lorex Home Hub Front View Back View Status Indicator Speaker MicroSD card slot Ethernet port Pairing / reset button Power port For optimal video streaming performance position the Lorex Home Hub centrally to the cameras. Note: Wireless signal strength can be reduced by other devices that emit frequencies or obstacles such as walls, ceilings, brick and other major obstructions. H871T6D-4BA2-E_QSG_EN_R1.
3 Status Indicator See the table below for definitions of the camera / Lorex Home Hub status indicator: Status Camera Lorex Home Hub • Sleep mode • Battery needs recharging N/A (solid) • Waking up • Alarm has been triggered Operating correctly (flashing) Reconnecting to network Ready to connect to network (flashing rapidly) Ready to pair with the hub N/A (flashing) Detecting Wi-Fi signal from the hub Ready to pair (solid) Factory default successful Factory default successful (flashing)
4 Pairing to the App Start by powering on the Lorex Home Hub and connecting to the app. 1. If you already have the app, skip this step. Scan the QR code on the right using your mobile device’s camera. Install the free Lorex Home app from the App Store™ or Google Play Store™. 2. Tap the Lorex Home icon to launch the app. 3. If you already have an account, skip this step. Tap Sign up, then follow the on screen prompts to create an account. Record your account details below: Email: Account Password: 4.
7. Choose your preferred connection set up method from Options A or B: Option A - Wired Connection (preferred method): Choose the wired connection and connect the Lorex Home Hub to your home router using the provided Ethernet cable. If your router is not in a central location in your home, then consider using the wireless option to ensure the hub is positioned centrally relative to all the different Lorex devices.
5 Installing the Battery To install the battery: Figure 1 Figure 2 Power port 1. Twist the battery cover clockwise to remove it from the camera (See Figure 1). 2. Insert the battery, following the arrow on the clip side of the battery. 3. Carefully align the arrow on the battery cover with the unlock symbol on the camera. Twist the cover counterclockwise to lock (See Figure 2). To charge the battery: Option A - Charging inside the camera 1.
6 Placing the Camera • Place the camera on any flat surface or mount it to a wall. • Do not place the camera near air conditioners and other air outlets. • Install the camera at the recommended angle and height to optimize motion detection accuracy. To optimize motion detection accuracy when: Mounted on a wall Placed on a shelf Distance Optimal accuracy for objects within 6.5ft to 32ft (2~10m). Distance Optimal accuracy for objects within 0.5-32ft (2~10m).
7 Installing the Camera Figure 1 Camera Anchors (Optional) Mounting bracket Adjustable screw Mounting surface Screws Mounting plate Mounting template To install the camera: 1. Stick the mounting template to the mounting surface or hold it up to mark the holes. Optional: Drill holes to insert the anchors if installing on concrete, stucco, brick, or any other masonry surface. Use a 7/32” or 15/64” drill bit (5.5 - 6mm). 2. Match the arrow side of the mounting plate template (see Figure 1).
Figure 2 3. Secure the mounting plate using a Philips head screwdriver and the screws. 4. Match the arrow side of the mounting bracket to the arrow side of the mounting plate (see Figure 2). 5. Insert the four tabs from the mounting plate into the mounting bracket and push down. A “click” sound will indicate that the bracket is locked in (see Figure 2). Note: To detach the mounting bracket from the mounting plate, simply push the bracket up to unlock it. 6.
8 Camera Live View For a complete overview of controls available on the Lorex Home app, scan the QR code below using your mobile device’s camera. Back Pause/ restart Shared users Settings Date & time Camera name Fullscreen view Video quality SD/HD Snapshot H871T6D-4BA2-E_QSG_EN_R1.
9 Troubleshooting 1. 2. 3. How to charge the battery. See section 5 “Installing the Battery” for more details. The camera runs out of battery too fast. • Check to see if the camera is frequently set off by motion. If so, enable “Person Detection” and decrease the motion and person detection sensitivity. • Change the performance mode of the camera to “Power Saving Mode”.
4. 5. The Lorex Home Hub is offline. • See section 3 “Status Indicator” for more details. • Check that the power adapter is securely connected. • Make sure the ethernet cable is properly connected to the Lorex Home Hub and your router (wired connection only). • Try to connect to the Internet from another device that is connected directly to your router to make sure you are getting service. • Power cycle the Lorex Home Hub. • Reset the Lorex Home Hub if necessary.
Camera safety precautions: • • • • • • Read this guide carefully and keep it for future reference. Follow all instructions for safe use and handling of the product. Use the camera within given temperature, humidity and voltage levels noted in the camera’s specifications. Do not disassemble the camera. Do not point the camera directly at the sun or a source of intense light. Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh, chemical-based cleaners.
Copyright © 2020 Lorex Corporation As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved. This device complies with part 15 of the FCC Rules.
