Installation Guide

ManualsBrandsLorex ManualsSmart Home4MP Super HD Wi-Fi Indoor Security Camera

Add Camera

Scan the QR code using your mobile device

Center the QR code inside the frame

Make sure that your camera is turned on

and has a working internet connection

Serial: 12345 6 789 012

fxc003484156

Step One: Initial Setup

1. Plug in your camera. Camera turns on automatically when the power adapter

is connected.

Setup Instructions

HD Wi-Fi Indoor Security Camera

For FAQs, setup guides, and support videos visit

lorextechnology.com

2. Remove the protective ﬁlm on the lens.

4. Tap SIGN UP and enter your email address and password to create a new

FLIR Cloud account.

3. Download the Lorex Secure app to your mobile device, then launch the app.

Step Two: Setting Up Your Camera

Wi-Fi Setup (Android Users Only)

If Bluetooth (BLE) is not available on your mobile device, follow these setup

instructions:

1. Tap ADD DEVICE, then tap HD WiFi Camera.

If this is not the ﬁrst device on your account, tap and then tap HD WiFi

Camera.

2. Scan the QR code as shown below.

NOTE: If you already have an existing FLIR Cloud account, enter your email

address and password and tap LOG IN.

NOTE: If Bluetooth (BLE) is not supported on your mobile device, follow the setup

instructions in the “Wi-Fi Setup (Android Users Only)” section.

NOTE: Refer to your mobile device’s user guide for instructions on turning on

Bluetooth.

1. Make sure your mobile device’s Bluetooth is turned on.

Lorex Secure

Tap ADD DEVICE

Tap HD WiFi

Camera

Installing Power Adapter Plugs (European Users Only)

1. Tuck in the power pins as illustrated

in the image below.

2. As shown in the image below,

push the power adapter plug in the

power adapter body until you hear

a click.

Power

adapter

Power

pins

Power

adapter plug

If you are a European user, you received a set of power adapter plugs relevant

to your country. To install the power adapter plugs:

USB port

facing down

NOTE: See the “Installing Power Adapter Plugs (European Users Only)”

section for instructions on installing European power adapter plugs.

2. Tap ADD DEVICE, then tap HD WiFi Camera.

If this is not the ﬁrst device on your account, tap and then tap HD WiFi

Camera.

3. Follow the on-screen instructions to complete setup.

NOTES:

• If you cannot scan the camera’s QR code, tap to enter the camera’s Device ID manually. See

the “Camera Overview” section for Device ID location.

• If your mobile device has Bluetooth turned on but your camera’s device ID does not show up on

the screen, tap “CAN’T FIND YOUR DEVICE?”. S ca n th e QR c ode a nd f oll ow t he o n- s cr ee n

instructions to complete setup.

fxc003484156

HD Wi-Fi Indoor Security Camera

Quick Start Guide

English / Español

What’s Included

FXCX2_LS_QSG_EN_SP_R1

lorextechnology.com

1. Status LED

Steady Red: Camera is starting up or resetting.

Slow-Flashing Red: The router or network that

the camera is connected to is down. Check your

router settings.

Steady Blue: Camera is connected to FLIR

Cloud services.

Fast-Flashing Blue: Firmware upgrade in

progress. DO NOT UNPLUG YOUR CAMERA.

Fast-Flashing Blue and Red: Firmware is

downloading and update will begin shortly.

DO NOT UNPLUG YOUR CAMERA.

Slow-Flashing Blue: Camera setup in progress.

Slow-Flashing Blue and Red: Camera is ready

for setup.

LED Off: Camera is in privacy / covert mode, or is

turned off.

6. Micro USB Power Port

7. Reset Button

8. microSD Card Memory Slot

9. Micro USB Power Cable Holder: Secure

the USB power cable with this clip.

10. Camera Base

11. QR Code

12. Device ID

13. Mounting Plate

Camera Overview

1 HD Wi-Fi

Security

Camera

1 Micro

USB Cable

1 microSD

Card

(Pre-installed)

1 Power

Adapter

1 Mounting

Plate

(Pre-attached)

Quick Start

Guide & Safety

Information

2 Mounting

Screws

2 Drywall

Anchors

3 Cable

Clips

NOTE: Camera conﬁguration, memory card size, power adapter plug, and

the number of accessories may vary by model. Please refer to your package

for speciﬁc details. Your accessories might appear different from the ones

depicted in this guide.

2. Camera Lens 4. Microphone

3. Speaker 5. Night Vision LED