Owner's Manual

Remote Viewing

2 Configure the following:

• Channel: Select the channel that

the PTZ camera connects to

• Protocol: Select the protocol of the PTZ camera*

• Baud Rate: Select the baude rate of the PTZ camera*

• Data Bit: Select the data bit rate of the PTZ camera*

• Stop Bit: Select the stop bit rate of the PTZ camera*

• Parity: Select the parity settings of the PTZ camera*

• Cruise: Select Enable or Disable*

• Address: Select the address of the PTZ camera*

*Consult the PTZ camera’s instruction manual for protocol and configuration details

3 Click Sav

e to apply your settings.

For details on connecting a PTZ camera to your system, see “Appendix H: Connecting a PTZ

Camera” on page 111.

Configuring the system time

To configure the system time:

1 Click the Remote Setting Tab>System>General.

2 Configure the system format and time:

• System Time: Ent

er the desired system time.

• Date Format: Select the desired date format (i.e Month, Date, year etc.)

• Time Format: Select between 12 hour or 24 hour time formats.

3 Select DST t

o enable daylight savings time, or NTP to sync the time with a NTP time server.

Changing the system’s menu time out

To change the system’s time out menu:

1 In the Menu Timeout drop-down menu, select the duration the menu stays on screen before

disappearing.

2 Click Sav

e to apply your changes.