Owner's Manual

Remote Viewing

2 Configure the Mainstream stream settings:

NOTE: Main stream refers to the local streaming of video content.

• Channel: Sele

ct the channel you wish to apply the settings to.

• Resolution: Select the desired recording resolution.

• FPS (Framerate): Select the desired recording frame rate. Note that higher frame rates

require greater bandwidth consumption during remote viewing.

• Bit Rate: Select the desired video bit rate.

• Audio: Select whether you want the system to record audio (audio cameras required, not

included).

3 Click Sav

e to apply your settings.

Configuring Basic Network Settings

The basic network menu allows you to configure the network protocol type (DHCP or

Static), UPnP and mobile phone login information.

To configure basic network settings:

1 Cl

ick the Remote Setting ta

b>Network.

2 Configure the following under Basic Configur

ation:

• Type: Sel

ect between DHCP or Static. If you select Static, you can edit the fields (i.e. IP address,

Netmask, Gateway)

• Auto Port Forwarding: Enable or disable Auto Port Forwarding.

3 Click Sav

e to apply your settings.