Owner's Manual

11
Starting the System
Starting the System
To power the system ON:
• Press I on the power switch on the rear panel of the system.
At
startup, the system performs a basic system check and runs an initial loading sequence.
After a few moments, the
system loads a live display view.
To power the system OFF:
• 16 Channel: Press O on the power switch on the rear panel of the system. Unplug the power
cord.
Password
Initial startup screen
ATTENTION: By default, passwords are disabled on the system. You do not need to
enter a password when accessing any system menus. For security purposes, it is
highly recommended to enable passwords on the system using the Password Menu.
For details, see “Managing Passwords” on page 25.
Password menu