Owner's Manual

Step 4: Connect the display

• Connect a HDMI cable (not included) to the HDMI port (16 channel only) OR;

• Connect the VGA cable (not included) from the monitor to the VGA port.

NOTE: If you have a monitor with DVI & VGA, you must use the VGA port. You cannot use a

DVI to VGA adapter.

Step 5: Connect the power adapter

• Connect the DC 12V connector to the system. Connect the end of the power adapter to a wall

socket or a surge protector.

Step 6: Verify camera image

• Power on the cameras, and then verify the camera video quality before mounting the cameras

to a permanent location.

• Mount the cameras under a sheltered location. Always verify the outdoor rating of your camera

before installing it in a permanent location.

HDMI

VGA

16 channel model shown

DC12V port

16 channel model shown