Manualshelf

Owner's Manual

ManualsBrandsLorex ManualsCamerasLorex Complete security camera set with 3 wireless and 4 wired cameras
11121314151617181920
4
Basic Setup
Step 1: Connect the BNC cameras
• Connect the BNC cameras to the BNC ports on the rear panel of the system.
Step 2: Connect the mouse
• Connect a USB mouse to the USB port on the rear panel of the system.
Step 3: Connect the Ethernet cable
• Connect the ethernet cable to the ethernet port on the rear panel of the system. Connect the
other end of the ethernet cable to a router on your network.
Push and twist the BNC
connector clockwise to
secure it to the BNC port.
16 channel model shown
16 channel model shown
Connect ethernet cable
16 channel model shown