Owner's Manual

111
Appendix H: Connecting a PTZ Camera
Appendix H: Connecting a PTZ Camera
You can connect RS-485 PTZ cameras (not included) to the PTZ Control Block on the rear
panel.
To connect a PTZ camera to the system:
1 Con
nect the Transmit Cable to the T
X (+) port of the PTZ block on the rear panel.
• 16-channel models: Connect the Transmit Cable to the RS-485 + port
.
2 Connect the Receive Cable to the TX
(-) port of the PTZ block on the rear panel.
• 16-channel models: Connect the Receive Cable to the RS-485
- port.
3 Connect the video cable to a BNC port.
To
enter PTZ camera settings in the DVR:
• Enter the PTZ protocol settings into the PTZ setup menu. Consult y
our PTZ camera’s user’s
guide for PTZ protocol details.
BNC
TX+
TX-