Owner's Manual

62
Using the PC/Mac Client Software
• : Click to close all connected channels. Note that the system continues to record when
you close channels remotely.
• : Previous page.
• : Next page.
• : Click to open the selected channel in full screen view.
• : Click to select the desired split-screen viewing options.
5 Split scre
en viewing: Click the desired viewing mode.
6 Mute: Cl
ick to mute audio.
7 PTZ Controls: PTZ (P
an, Tilt, Zoom) control for connected PTZ cameras (not included).
8 Connection Status: Sho
ws the type of connection used.
• P2P (pe
er-to-peer) indicates that the video is streaming directly from the DVR to the computer
running the Client Software.
• RL
Y (relay) indicates that the video is streaming through a Lorex video server. While relay
mode is activated, the system will disconnect after 10 minutes of inactivity. Relay mode is only
used when a direct connection cannot be made between the DVR and computer.
Changing Viewing Modes
You can change the number of channels that the system displays simultaneously (i.e.
Split-screen Mode, Single-channel Mode, etc.).
To change the DVR’s viewing mode:
• Click one of the following: .
• If the controls are not shown, click .