Owner's Manual

122
Appendix F: DDNS Setup (Advanced)
4 Open the Lorex Stratus Client ( ) from the Applications list.
5 Under Lo
gin Type, select IP Login.
6 Under IP A
ddress, enter the DVR’s IP Address (e.g. 192.168.0.100 ).
7 Under Us
er Name, enter the DVR’s user name (default: admin).
8 Under Pa
ssword, enter the DVR’s password (default: 000000).
9 Under Cl
ient Port, enter the DVR’s Client Port (default: 9000).
10 Cl
ick Login.
• If th is is the fir st t ime con necti ng to yo ur syste m, you w ill be promp te d to cha nge th e passwo rd .
Ent
er the new password and click OK.
• Enter the new password in the login screen and click Login to
connect to the DVR.
DDNS Setup—Access your DVR Remotely over the Internet
Setting up DDNS connectivity allows you to view your DVR from any computer or
compatible mobile device with Internet access.
NOTE: Ex
cept where noted, the instructions below are the same for PC and Mac.
To set up remote connectivity
with your DVR, you must:
1 P
ort forward the HTTP and Client ports (default: 80 and 9000) on your router to your DVR’s IP
address.
2 Cr
eate a DDNS account.
3 Enabl
e DDNS on the DVR.
4 T
est the remote connection by entering your DDNS address in a web browser.
Select IP Login
Enter IP address
Enter User Name (default: admin)
Enter Password (default: 000000)
Enter Client Port (default: 9000)
Click Login
Enter the new password
and click OK