User Guide

Installing the Camera

Screws

Anchors

(Optional)

Mounting surface

Mounting template

Mounting plate

Camera

Mounting

Bracket

1. Stick the mounting template to the mounting

surface or hold it up to mark the holes.

Optional: Drill holes for the anchors if

installing on concrete, stucco, brick, or any

other masonry surface. Use a 7/32” or

15/64” drill bit (5.5 - 6mm).

2. Align the mounting plate to the

mounting surface and use a Philips head

screwdriver to secure the screws.

3. Align and push in the “UP” side of the

mounting bracket to the “UP” side of the

mounting plate.

Note: Be sure to follow the “UP”/“TOP”

directions on the mounting template

and mounting plate.

To install the camera:

4. Slide the mounting bracket down into place. A “click” sound will

indicate that the bracket is locked into the mounting plate.

5. Screw the camera onto the bracket and adjust the camera’s

angle as needed.