2K QHD Wire-Free Security System Quick Start Guide lorex.
Contents Welcome! Thanks for your purchase of the 2K QHD Wire-Free Security System. Here’s how to get started.
1 Package Contents 2 Overview: Camera Front View Wire-Free Camera* Charging Adapter Charging Cable Back View Warning light Power port Status indicator Microphone Mounting screw thread Battery Pack* Pairing button Light sensor Mounting Bracket* Anchors (x2)* Screws (x2)* Mounting Template* Mounting Plate* Motion sensor Speaker Lorex Home Hub Lorex Home Hub Power Adapter Ethernet Cable Memory card (pre-inserted)** Attention: A REGULATED UL / CSA APPROVED power supply is REQUIRED for use wi
3 Status Indicator Overview: Lorex Home Hub Front View See the table below for definitions of the camera / Lorex Home Hub status indicator: Back View Status Status Indicator Speaker Ethernet port Power port Pairing / reset button Lorex Home Hub • Sleep mode • Battery needs recharging N/A (solid) • Waking up • Alarm has been triggered Operating correctly (flashing) Reconnecting to network Ready to connect to network (flashing rapidly) Ready to pair with the hub N/A (flashing) Detecting W
4 Pairing to the App Start by powering on the Lorex Home Hub and connecting to the app. 1. If you already have the app, skip this step. Scan the QR code on the right using your mobile device’s camera. Install the free Lorex Home app from the App Store™ or Google Play Store™. 2. Tap the Lorex Home icon to launch the app. 3. If you already have an account, skip this step. Tap Sign up, then follow the on screen prompts to create an account. Record your account details below: Email: Account Password: 4.
5 Installing the Battery To install the battery: 6 Placing the Camera Figure 1 Figure 2 Power port 1. Twist the battery cover clockwise to remove it from the camera (See Figure 1). 2. Insert the battery, following the arrow on the clip side of the battery. 3. Carefully align the arrow on the battery cover with the unlock symbol on the camera. Twist the cover counterclockwise to lock (See Figure 2).
Installing the Camera To install the camera: Mounting surface 1. Anchors (Optional) Camera Optional: Drill holes for the anchors if installing on concrete, stucco, brick, or any other masonry surface. Use a 7/32” or 15/64” drill bit (5.5 - 6mm). Screws Mounting Bracket Stick the mounting template to the mounting surface or hold it up to mark the holes. 2. Align the mounting plate to the mounting surface and use a Philips head screwdriver to secure the screws.
Camera Live View For a complete overview of controls available on the Lorex Home app, scan the QR code below using your mobile device’s camera. Back Pause/ restart 9 Troubleshooting Shared users Settings Date & time 1. 2. Camera name Fullscreen view Video quality SD/HD Snapshot Audio 3. Recording 2-Way talk Warning light Siren Privacy mode How to charge the battery. See section 5 “Installing the Battery” for more details. The camera runs out of battery too fast.
4. 5. The Lorex Home Hub is offline. • See section 3 “Status Indicator” for more details. • Check that the power adapter is securely connected. • Make sure the ethernet cable is properly connected to the Lorex Home Hub and your router (wired connection only). • Try to connect to the Internet from another device that is connected directly to your router to make sure you are getting service. • Power cycle the Lorex Home Hub. • Reset the Lorex Home Hub if necessary.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Copyright © 2020 Lorex Corporation As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved. This device complies with part 15 of the FCC Rules.
