Owner's Manual

3
Connecting the Monitor
3. Connecting the Monitor
Power Adapter
Monitor
DVR or PC
HDMI Cable (Audio and Video)
VGA Cable (Video)
Headphones
(Optional, not included)
RCA Cable (Audio, not included)
1 Connect an HDMI cable from the HDMI port on the monitor to an HDMI port on your DVR or
PC to enable high-definition video and audio; OR connect a VGA cable from the PC port on the
monitor to a VGA port on your DVR or PC.
• If you are using a VGA cable, to enable the built-in speakers, you will need to connect an RCA
ca
ble (not included) from the PCL port on the monitor to an Audio Out port on your DVR.
2 Con
nect the power adapter to the DC
IN 12V port on the monitor. Connect the other end to a
surge protector or power outlet.
3 Press the PO
WER button on the side of the monitor to power on the monitor.
4 Power on your DVR or PC.