Owner's Manual

63
Camera
6 Use the Sensitivity slider to select the sensitivity for tamper-proof alarms.
Check to enable Tampering alarms
Click and drag to select tamper-proof area
7 Click and drag inside the image to select the area where you would like to detect video
tampering. It is recommended to place the area in the middle of the image.
8 Click
under Action to open the Action menu.
Click to open the action menu
9 In the Arming Schedule tab, configure the times of day you would like tamper-proof alarms
to be enabled for the selected camera.
• Under We
e
k, select the day of the week you would like to configure.
• Configure up to 8 time periods per day when motion detection will be enabled.
• Click Copy
to copy the currently selected day’s schedule to other days of the week.
Select day of the week
Enter times when tamper alarms will
be enabled
10 In the Action tab, check the alert actions that you want to occur if the lens is covered on the
selected channel.
• F
ull Screen Monitoring: The sel
ected channel will open in full screen.
• Audible Warning: Sys
tem will beep.
• Notify Surveillanc
e Center: An alert will be sent to the client software.