Owner's Manual

51
Record
7 Click and drag inside the schedule to apply the currently selected recording type.
Click to select a schedule type
Click and drag to add the recording
type to the schedule
Select camera
8 (Optional) To copy the schedule to other cameras, click Copy. Check cameras you would like
to copy the schedule to. Check/un-check IP Camera to copy the schedule to all cameras.
Click OK to copy the schedule.
9 Click A
pply to save changes. Right-click repeatedly to return to live view.
Recording Setup
Use the Recording Setup to configure recording and streaming parameters for your
cameras such as the resolution, frame rate, network bandwidth, and event pre and
post-recording durations.
The Encoding Settings are set separately for Continuous and
Event (motion) recording.
They may also be set for remote streaming to a computer or mobile device through the
Substream tab.
Configuring Recording Resolution, Frame Rate, and Image Quality
The resolution, frame rate, and image quality can be set separately for each camera, as
well as for continuous and motion recording.
To configure the recording resolution, frame rate,
a
nd image quality:
1 Right-click and then click Menu
.
2 Enter the system user name (default: ad
min) and password (default: 000000) and click Yes.
3 Click Re
cord>Recording Setup.
4 Under Camera, sel
ect the camera you would like to configure.
5 Configure the following settings under Mains
tream (Continuous) to set the parameters for
continuous recording:
• Under Resolution, sel
e
ct the recording resolution of the camera: 1280*720 (720P) or
1920*1080 (1080P).
• Under Video Quality, sel
ect the video quality from Lowest to Highest.