Owner's Manual

HDD

5 Click Detect to begin the scan. The NVR will scan the hard drive for bad sectors and show the

results in the chart. Green blocks are normal sectors, and red blocks are damaged sectors.

Select hard drive

Start bad sector test

The hard drive scan may take up to a couple hours. If you exit the Bad Sector Detection

sub-menu, the scan will be paused.

Overwrite

Enabling/Disabling Overwrite

Overwrite is enabled by default. When overwrite is enabled, the NVR will begin to overwrite

the oldest video footage when the hard drive is full. If Overwrite is not enabled, the NVR will

stop recording when the hard drive is full.

To enable/disable overwrite:

1 Right-click and then click Menu

2 Enter the system user name (default: ad

min) and password (default: 000000) and click Yes.

3 Click HDD>Overwr

ite.

4 Check Overwrit

e to enable overwrite or un-check to disable.

Check to enable

Overwrite

5 Click Apply to save your settings.