Instruction Manual English Version 2.
IMPORTANT INSTRUCTIONS SAFETY INSTRUCTIONS Warning – To reduce the risk of fire, electric shock, or serious personal injury: Do not use this product near water; e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or the like. • • Situate this product away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. • Operate the product only with the supplied power adapter.
BASIC CONNECTION GENERAL PARTS AND OPERATIONS 1. AUTO button - Press this button to automatically adjust the screen display; in menu setting page, press this button to return to previous menu page. 4. [ + ] button - Press this button to enter BRIGHTNESS setting page directly. Within the menu, press [ + ] to move right or down. 2. MENU button - Press this button to enter the menu setting page. 5. POWER button - Press this button to power ON/OFF the unit. 3.
MENU OPERATIONS Press the MENU button to enter the menu setting page as shown below: • Use the [ - ] or [ + ] button on the unit to select submenus and press the [MENU] button to enter the submenu. (In this submenu page, you can press the [ - ] or [ + ] button to select different submenu page as desired.) • Press the [MENU] button again to enter next menu setting page you select. Press the [ - ] or [ + ] button to select different items as desired.
3. TRACKING 3.1 HORIZONTAL - This item is used to move the screen display to the left or right. - The HORIZONTAL can be adjusted from 0-100. 3.2 VERTICAL - This item is used to move the screen display up or down. - The VERTICAL can be adjusted from 0-100. 3.3 CLOCK/PHASE/SHARPNESS - Press [ - ] or [ + ] button to select CLOCK, PHASE or SHARPNESS and press [MENU] button to confirm, then press [+] or [-] button to adjust. - The CLOCK/PHASE can be adjusted from 0-100. - The SHARPNESS can be adjusted from 0-10.
MAINTENANCE • Be sure to press POWER to set the player to the standby mode and disconnect the AC adaptor before maintaining the monitor. • Wipe the monitor with a dry, soft cloth. • If the surfaces are extremely dirty, wipe clean with a cloth which has been dipped in a weak soap-and-water solution and wrung out thoroughly, and then wipe again with a dry cloth. • Never use alcohol, benzene, thinner, cleaning fluid or other chemicals. And do not use compressed air to remove dust. SPECIFICATIONS 1.
