Version 1.0 FRANÇAIS USER’S GUIDE ENGLISH SWEET PEEK MINI VIDEO BABY MONITOR ESPAÑOL www.lorexbaby.
Safety Precautions • Adult assembly is required. Keep small parts away from children when assembling. • This product is not a toy. Do not allow children or infants to play with it. • This video monitor is not a substitute for responsible adult supervision. • Test the video monitor before use. Become familiar with its functions. • Keep the cords out of reach from children and infants. • Never use extension cords with power adapters. • Only use the chargers and power adapters provided.
Product Includes ...............................2 Monitor Overview ............................2 Camera Overview ............................3 Getting Started ................................4 Optional - Wall Mounting the Camera........ 7 Using Your Baby Monitor .................8 Using the Menu........................................ 8 Talking to Your Baby................................. 9 Adjusting Volume..................................... 9 Adjusting Screen Brightness.......................
Product Includes x1* x1* Power Adapter Camera x2* x2* x2* Screws & Anchors Cable Clips x1 x1 Power Adapter x1 Battery Monitor *Contents may vary by model Monitor Overview Antenna Sound LEDs Display Talk Power LED Power on/off Video on/off + VOX ESC / night light Speaker Link LED Volume up/down Menu 2
ENGLISH Belt clip stand Battery compartment Power port Camera Overview Antenna Night-light Nighttime LED’s Lens Power LED Microphone Mounting stand On/off switch Power port Light sensor Speaker Pairing button 3
Getting Started 1 Connect the power adapter to the camera. Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help keep power cords away from your child. 2 Slide the power switch to ON. Power switch 3 Press down on the battery compartment door and slide it off the monitor.
Connect the battery cable to the monitor. Battery cable Battery terminals The battery cable only connects one way. Do not force the battery cable. 5 Replace the battery compartment door. 6 Connect the power adapter to the monitor. 7 Press and hold the power button to turn on the monitor.
Tips • It is recommended to charge the battery for 3 hours before use. • For overnight monitoring, it is recommended to connect the power adapter. When fully charged, the monitor will stay on up to 5 hours in normal mode or X+ hours on Video OFF mode (see page 13). • For better reception, flip up the antenna on the monitor.
Before permanently mounting the camera: • Determine where you will get the best view of your baby. • Ensure the power cable is long enough to power the camera. Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help keep power cords away from your child. Cable Clips 1 Drill 2 holes in the wall with centers exactly 48mm apart. 2 Tap anchors into holes with a hammer. Insert screws 2/3 of the way.
Using Your Baby Monitor The monitor shows the following icons during use: Icon Meaning Icon Signal strength Meaning Talk activated Selected channel Sequence mode activated Battery full* Night-light activated Battery low Night vision activated Camera out of range or off VOX mode activated *When battery is charging, icon will fill up.
Press and hold to talk to the selected camera Adjusting Volume Press to adjust the volume Adjusting Screen Brightness 1 Press to open menu.
2 Press to adjust brightness Press to confirm brightness 3 Press to exit menu.
ENGLISH 2 Press up/down to select Press to confirm 3 1 2 3 4 Press up/down to select the channel you would like to view OR Select to select Sequence mode. During Sequence mode the monitor will automatically switch channels every 6 seconds 4 Press to confirm channel To connect additional cameras to the monitor, see “Pairing Additional Cameras” on page 14.
Enabling VOX Mode (Voice Trigger) In VOX mode, the monitor’s screen and speaker will turn off after a minute unless sound is detected at the selected sensitivity level. This conserves battery power, and alerts you only when needed. To activate VOX mode: 1 Press and hold until is shown While VOX is activated, the monitor’s screen and speaker will turn off after a minute unless sound is detected above the preset sensitivity level. Press any button to turn the screen back on.
1 Press to turn the screen off and monitor sound only. The monitor will play sound from the selected channel only. Notes • If Sequence mode is enabled, the monitor will play sound from the channel that is currently selected. • VOX mode will override Video Off mode. See “Enabling VOX Mode (Voice Trigger)” on page 12 for details. 2 Press any button to turn the screen back on.
Pairing Additional Cameras The camera(s) included have already been paired with the monitor. If you have purchased additional add-on cameras (model# BB1811AC1), OR if your monitor and camera are not paired up, follow the steps below. To pair a camera to your monitor: 1 Place the camera and monitor next to each other. Make sure the camera and monitor are turned on.
Press to select the channel you would like to pair the camera to 1 2 3 4 Press to begin pairing. The LINK LED will start flashing If a camera is already connected to this channel, the new camera will replace the existing camera. 5 Press the PAIR button on the back of the camera. PAIR button Images from the camera are immediately shown on the monitor once the camera is successfully paired. 5 Press twice to exit menu.
Disabling Channels You can disable empty channels so they do not appear on the monitor when changing channels manually or using Sequence Mode. You only need to do this if you have moved a camera to a different channel using the pairing function. To disable channels: 1 Press to open the menu 2 Press to select Press to open the delete channel sub-menu 3 Press to select the channel you would like to delete and press to confirm.
Camera Frequency 2.4GHz Maximum Range Up to 450ft / 138m outdoors* Up to 150ft / 46m indoors* Image Sensor 1/5” Color CMOS Lens 3.0mm F2.5 IR LED 6 pcs Power Adapter 6.0V DC 800mA Weight 0.3lbs / 0.1kg Monitor Frequency 2.4GHz Display 1.8” TFT Color LCD Power Adapter 6.0V DC 800mA Battery Li-ion Rechargeable Battery 3.6V DC 750mAh Battery Life Up to 5 hours in normal mode Up to X+ hours in Video Off Weight 0.4lbs / 0.2kg *Based on unobstructed line of sight.
Troubleshooting Problem No video displayed on the monitor Solution • Press and hold the button to power on the monitor. • Monitor is out of batteries. Plug in the monitor power adapter. • Video Off or VOX mode is on. Press any button to turn the screen back on. Monitor screen keeps turning off • VOX mode is on. See “Enabling VOX Mode (Voice Trigger)” on page 12 for details on disabling VOX mode. • The monitor battery is low.
Clean the monitor and camera with a slightly damp cloth or an anti-static cloth. Never use cleaning agents or abrasive solvents. • Do not clean any part of the product with cleaners with thinners or other solvents and chemicals. This may cause permanent damage to the product, which is not covered by the Warranty. When necessary, clean it with a damp cloth. ENGLISH CLEANING • Keep your camera and monitor away from hot, humid areas or strong sunlight, and do not get it wet.
CANADA/IC NOTICE This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
