Quick Start Guide

3. Remov
e the 4 pre-inserted plugs from the ceiling/
table mounting bracket.
4. Attach the camera t
o the ceiling/table mounting
bracket using the threaded insert at the rear of the
camera. Rotate the camera clockwise until attached,
then use the wrench t
o tighten the adjustable nut in
place.
5. Place the bracket o
ver the drilled holes. Using a
screwdriver and the provided screws, secure the
bracket to the surface.
6. Rotate the adjustable ring counter-clockwise to
loosen and adjust the camera to the desir
ed position,
then tighten to secure.
Optional:
• Feed the camera cable thr
ough the hole at the base
of the bracket or the mounting surface.
• Open the camera’
s settings in the app and enable
Image Rotation to flip the camera image.
W482CAD_QSG_TRILINGUAL_R1.indd 15W482CAD_QSG_TRILINGUAL_R1.indd 15 2021-05-27 2:51:05 PM2021-05-27 2:51:05 PM